So, there are some misalignments with the handle's position, sometimes in the center, sometimes towards the back, but it's not a big deal, you've grasped the concept, that's what matters :D
You can move on to the next step âïž
Hello Marie-Line !
Elle est trĂšs bien cette caisse Ă outils, bravo !
Mmmh, there are some issues with perspective and structure, but otherwise, it works.
However, this model is much simpler than the toolbox, for example, so it's hard for me to judge whether you really have a good grasp of the exercise (which is extremely important) or not.
Try using the models provided in the course, and you will have plenty of opportunities to take on more personal subjects later ^^ I know it's not fun, but you have to go through this at the beginning >.<
Good luck o/
Hello Guillaume !
Mmmh il y a des petits soucis de perspective et de construction, mais sinon ça fonctionne.
I'm sending you my sketches. Sorry, I will send you multiple messages because I can't put two images in the same file from my phone. Thanks for your feedback!
Hello,
Here are my exercises,
Volumes are more complicated to work with than 2D, but the more we draw the object, the faster it is to discern in this or that position,
I had never done a study board until now in drawing, I think it's going to become my new habit!
Thank you!
Indeed, the more you draw the object, the more you understand how it works, the easier it becomes :D
I agree, but I want to point out a few things:
> Be careful with the proportions, they sometimes tend to shift from one view to another, it's more noticeable on the toolbox than on the camera (sometimes it's longer, sometimes it's more squat, etc.)
> Pay attention to certain details, I'll take the example of the toolbox again. You made the bottom tray flared, but again, depending on the angle, it doesn't flare the same. It's obvious when comparing the front and back views :)
But otherwise, your work is really, really good. I'm mentioning this so that you pay attention to it in the following exercises and your future drawings in general ^^
Hello Flouzio !
Tes planches sont trĂšs chouettes ^^
En effet, plus tu dessines l'objet, plus tu comprends comment il marche, plus ça devient facile :D
Je valide, mais j'attire ton attention sur des petites choses :
Thank you very much for the feedback!
Indeed, I had noticed the proportion issues, but not the details. I will try to pay more attention to that in the next exercises! I plan to practice a bit more on other objects to work on these aspects.
Thanks again!
Indeed, your proportions are changing quite a bit. Take a reference measurement and use it for all your views (for example, the width of the box > how many times does it fit into the length, then into the height, etc?). Take the time to set your proportions at the beginning, itâs part of the fundamentals, the rest is just decoration, so to speak ^^
Apart from that, I notice a small point that doesn't seem quite mastered yet: the lid. It doesnât have the same shape in all your views. In the side view, for example, you show that there is a raised area on the back half of the box (on the top), but this is not found anywhere else (even though it is indeed the case ^^), instead in the other views, there is a raised rectangular area in the middle of the box (which technically also works).
Take another quick look at that, if you made the mistake it's because you must have had trouble understanding that area. Look carefully: where is the handle attached? Where is there really volume on the top of the lid?
I assume you'll be more careful with the camera, so you can rework this area if you wish, but otherwise you can move on, the rest works well ^^
Interactions
Nombre de sujet(s) : 1
Nombre de réponse(s) : 27
19/04/2020
Here is my toolbox, I started with 2D views and tried 3D. The width/length proportions aren't really there đ
VoilĂ ma boĂźte Ă outils, j'ai commencĂ© par des vues 2D et tentĂ© la 3D. Les proportions largeur/longueur ne sont pas vraiment lĂ đ
Want to learn drawing?
See our coursesInteractions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
22/04/2020
This toolbox is really good, well done!
So, there are some misalignments with the handle's position, sometimes in the center, sometimes towards the back, but it's not a big deal, you've grasped the concept, that's what matters :D
You can move on to the next step âïž
Elle est trĂšs bien cette caisse Ă outils, bravo !
Bon tu as des décalages au niveau de la position de la poignée, parfois au centre, parfois vers l'arriÚre, mais c'est pas grave, tu as bien saisi le principe, c'est ce qui compte :D
Tu peux passer Ă la suite âïž
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 6
19/04/2020
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
22/04/2020
Mmmh, there are some issues with perspective and structure, but otherwise, it works.
However, this model is much simpler than the toolbox, for example, so it's hard for me to judge whether you really have a good grasp of the exercise (which is extremely important) or not.
Try using the models provided in the course, and you will have plenty of opportunities to take on more personal subjects later ^^ I know it's not fun, but you have to go through this at the beginning >.<
Good luck o/
Mmmh il y a des petits soucis de perspective et de construction, mais sinon ça fonctionne.
Par contre, ce modÚle est beauuuucoup plus simple que la caisse à outils par exemple, donc c'est difficile pour moi de juger si tu as réellement bien acquis l'exercice (qui est ultra important) ou pas.
Essaye de prendre les modÚles donnés dans le cours, tu auras tout le loisir de partir sur des sujets plus personnels par la suite ^^ Je sais que c'est pas drÎle, mais il faut en passer par là au début >.<
Bon courage o/
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 14
20/04/2020
I'm sending you my sketches. Sorry, I will send you multiple messages because I can't put two images in the same file from my phone. Thanks for your feedback!
Gaëlle
Je vous envoie mes croquis. DĂ©solĂ©e je vous enverrai plusieurs messages parce que je ne parviens pas Ă mettre deux images sur un mĂȘme fichier depuis mon tĂ©lĂ©phone. Merci pour vos retours!
Gaëlle
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
22/04/2020
Yes, unfortunately, we can't attach multiple images in the same message ^^'
Your work is really good :D I applaud you for the camera, you've pushed the details and I see that you understood very well. Big kudos to you! âïž
Oui, on ne peut malheureusement pas joindre plusieurs images dans un mĂȘme messages ^^'
Ton travail est vraiment bien :D J'applaudis pour la camĂ©ra, tu as poussĂ© le dĂ©tails et je vois que tu as trĂšs bien compris. Grand bravo Ă toi ! âïž
Try our courses for free
See our coursesInteractions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 14
20/04/2020
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
25/04/2020
Great job, I approve âïž
Super taff, je valide âïž
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 14
20/04/2020
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 14
20/04/2020
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 8
20/04/2020
Want to learn drawing?
See our coursesInteractions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
22/04/2020
You can use the stabilizer, it's handy and more pleasant ^^
Your work is cool, it works well, I approve :D
Tu peux utiliser le stabilisateur, c'est pratique et plus agréable ^^
Ton travail est cool, ça fonctionne bien, je valide :D
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 7
20/04/2020
Here are my exercises,
Volumes are more complicated to work with than 2D, but the more we draw the object, the faster it is to discern in this or that position,
I had never done a study board until now in drawing, I think it's going to become my new habit!
Thank you!
Exercise 1:
Voici mes exercices,
Les volumes sont plus compliqués à travailler que la 2D, mais plus on dessine l'objet plus il est rapide à discerné dans tel ou tel position,
je n'avais jamais fait de planche d'étude jusqu'à maintenant en dessin, je pense que ça va devenir ma nouvelle habitude !
Merci !
Exercice 1 :
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 7
20/04/2020
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
22/04/2020
Your panels are really cool ^^
Indeed, the more you draw the object, the more you understand how it works, the easier it becomes :D
I agree, but I want to point out a few things:
> Be careful with the proportions, they sometimes tend to shift from one view to another, it's more noticeable on the toolbox than on the camera (sometimes it's longer, sometimes it's more squat, etc.)
> Pay attention to certain details, I'll take the example of the toolbox again. You made the bottom tray flared, but again, depending on the angle, it doesn't flare the same. It's obvious when comparing the front and back views :)
But otherwise, your work is really, really good. I'm mentioning this so that you pay attention to it in the following exercises and your future drawings in general ^^
Tes planches sont trĂšs chouettes ^^
En effet, plus tu dessines l'objet, plus tu comprends comment il marche, plus ça devient facile :D
Je valide, mais j'attire ton attention sur des petites choses :
> Attention aux proportions, elles ont parfois tendance à bouger d'une vue à l'autre, c'est plus flagrant sur la caisse à outils que sur la caméra (parfois elle est plus longue, parfois plus trapue, etc.)
> Attention à certains détails, je vais prendre l'exemple de la caisse à outils à nouveau. Tu as fait le bac inférieur évasé, mais encore une fois, selon l'angle de vue, il ne s'évase pas pareil. C'est flagrant en comparant les vues de face et de dos :)
Mais sinon ton travail est vraiment trĂšs trĂšs bien. Je te mentionne ça pour que tu y prĂȘtes attention dans les exercices suivants et tes futurs dessins en gĂ©nĂ©ral ^^
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 7
22/04/2020
Indeed, I had noticed the proportion issues, but not the details. I will try to pay more attention to that in the next exercises! I plan to practice a bit more on other objects to work on these aspects.
Thanks again!
En effet j'avais remarqué les problÚmes de proportions, mais pas sur les détails, je vais essayer de faire plus attention à ça sur les prochains exercices ! Je penses m'entraßner un peu plus sur d'autres objets pour travailler ces points là .
Encore merci !
Try our courses for free
See our coursesInteractions
Nombre de sujet(s) : 1
Nombre de réponse(s) : 11
20/04/2020
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
22/04/2020
That's pretty good ^^
Indeed, your proportions are changing quite a bit. Take a reference measurement and use it for all your views (for example, the width of the box > how many times does it fit into the length, then into the height, etc?). Take the time to set your proportions at the beginning, itâs part of the fundamentals, the rest is just decoration, so to speak ^^
Apart from that, I notice a small point that doesn't seem quite mastered yet: the lid. It doesnât have the same shape in all your views. In the side view, for example, you show that there is a raised area on the back half of the box (on the top), but this is not found anywhere else (even though it is indeed the case ^^), instead in the other views, there is a raised rectangular area in the middle of the box (which technically also works).
Take another quick look at that, if you made the mistake it's because you must have had trouble understanding that area. Look carefully: where is the handle attached? Where is there really volume on the top of the lid?
I assume you'll be more careful with the camera, so you can rework this area if you wish, but otherwise you can move on, the rest works well ^^
C'est pas mal tout ça ^^
En effet tes proportions bougent pas mal. Prends une mesure de référence et utilise-la pour toutes tes vues (par exemple la largeur de la boite > combien de fois entre-t-elle dans la longueur, puis dans la hauteur, etc ?). Prends bien le temps de poser tes proportions au début, ça fait partie des fondamentaux, le reste c'est du decorum si on peut dire ^^
A part ça, je note un petit point qui me semble pas tout Ă fait acquis : le couvercle. Il n'a pas la mĂȘme forme sur toutes tes vues. Sur la vue de profil par exemple, tu montres qu'il y a une zone surĂ©vlevĂ© sur la moitiĂ© arriĂšre de la boite (sur le dessus), mais on ne retrouve ça nulle part ailleurs (alors que c'est effectivement le cas ^^), Ă la place sur les autre vues, on a une surĂ©lĂ©vation sur une zone rectangulaire au milieu de la boite (ce qui techniquement marche aussi).
Jette Ă nouveau un petit coup d'oeil lĂ -dessus, si tu as fait l'erreur c'est que tu as dĂ» avoir du mal Ă comprendre cette zone. Regarde bien : oĂč est fixĂ©e la poignĂ©e ? OĂč y a-t-il rĂ©ellement du volume sur le dessus du couvercle ?
Je pars du principe que tu feras plus attention avec la caméra, donc tu peux retravailler cette zone si tu le souhaites, mais sinon tu peux passer à la suite, le reste marche bien ^^
Interactions
Nombre de sujet(s) : 1
Nombre de réponse(s) : 11
23/04/2020
Interactions
Nombre de sujet(s) : 1
Nombre de réponse(s) : 5
20/04/2020
here is my work for the 2D position
voilĂ mon travail pour le poste en 2D
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
22/04/2020
You need to go a bit further and give me at least one additional view ^^
Pay attention to the handle: what is its shape? How is it attached to the lid? And where exactly is it attached?
Take your time, observe carefully đ
Il faudrait pousser un poil plus et me faire au moins une vue supplémentaire ^^
Fais attention Ă la poignĂ©e : quelle est sa forme ? Comment est-elle fixĂ©e au couvercle ? Et oĂč est-elle fixĂ©e exactement ?
Prends ton temps, observe bien đ
Want to learn drawing?
See our courses