Not bad on the profile, it lacks a bit of the skull at the back of the head. You can roughly consider that the attachment between the ear and the face is "approximately" at the center of the head in profile. This gives you an idea of the size of the skull that is missing ^^ It's approximate, generally it's a bit less, but it's a good reference to have something more coherent.
Be careful not to make the man's face too slender in profile and not to push his jaw too far forward, you are more accurate on the jaws of the girl and the child ^^
For the 3/4 view, it's not bad either, I'm just going to send you a correction to review the face line which is not quite right ^^ Actually, you place the reliefs incorrectly, so I made a small diagram to show you.
Hello Jujuloulou o/
Ho pas mal sur le profil, ça manque un peu de crâne à l'arrière de la tête. Tu peux considérer grosso modo que l'accroche entre l'oreille et le visage est "à peu près" au centre de la tête sur le profil. Ça te donne une idée de la taille du crâne qui manque ^^ C'est à la louche, en général c'est un peu moins, mais c'est un bon repère pour avoir quelque chose de plus cohérent.
Attention à ne pas trop affiner le visage de l'homme de profil aussi et ne pas mettre trop sa mâchoire en avant, tu es plus juste sur les mâchoires de la fille et de l'enfant ^^
Pour le 3/4 c'est pas mal aussi, je vais juste te joindre une correction pour revoir la ligne du visage qui n'est pas tout à fait juste ^^ En fait tu places mal les reliefs, du coup je t'ai fait un petit schéma pour te montrer.
Sorry for the delay, I thought I had forgotten someone ^^
You're doing pretty well honestly, you just have two issues that consistently arise:
1. From the front, don't hesitate to tilt the edges of the face (don't do straight vertical lines) so that it widens a bit towards the skull :)
2. From a 3/4 view, you systematically offset the shape of the face contour, so I've attached a sketch for you to better understand which indentation and which bulge corresponds to what.
It lacks a bit of skull from the 3/4 view too, but we will come back to that a bit later :)
Otherwise it's very good :D
Hello Pierfilipe o/
Navré pour le délai, il me semblait bien avoir oublié quelqu'un ^^
Tu t'en sors pas mal honnêtement, tu as juste deux problèmes qui se retrouvent systématiquement :
1. De face, n'hésite pas à incliner les bords du visage (ne pas faire des traits bien verticaux) pour que ça s'élargisse un peu vers le crâne :)
2. De 3/4, tu décales systématiquement la forme du contour du visage, du coup je t'ai joint un croquis pour que tu situes mieux quel creux et quelle bosse correspond à quoi
Ça manque un peu de crâne aussi de 3/4, mais on reviendra dessus un peu plus tard :)
Autrement c'est très bien :D
Not bad! The front-facing face is almost impeccable, I find the ears a bit small, but you will adjust that as you learn the other elements of the face, since everything is more or less proportional ^^
It's also missing some skull, and here I've attached a correction.
For the 3/4 view, it's pretty good too, it's just lacking a bit of forehead and skull there as well. Also be careful with the chin which is a bit too far back :)
Hello Guigui o/
C'est pas mal ! Le visage de face est quasi impeccable, je trouve les oreilles un peu petites, mais ça, tu l'ajusteras en apprenant les autres éléments du visages, vu que tout est plus ou moins proportionnel ^^
Il manque de crâne aussi, et là je t'ai joint une correction.
Pour le 3/4 on est pas mal aussi, il manque un peu de front et de crâne là aussi. Attention aussi au menton qui est un peu trop loin en arrière :)
Your front-facing portraits are quite good, but your profile ones need a bit more work.
You are missing quite a bit of the skull (as a guide, you can consider that the junction of the ear/face is roughly at the halfway point of the head in profile view). You also tend to place the neck too far forward, too centered under the head whereas it should be more towards the back, because the spine joins the skull towards the back of the head near the ears, and the spine is at the back of the neck. I made a little diagram for you ^^
So from the 3/4 angle you have the same issues: a bit of the skull is missing and the neck is too forward, but otherwise, it's very good :)
Hello Juleeette o/
C'est pas mal, tes visages de face marchent bien, ça pêche un peu plus de profil par contre.
Il te manque pas mal de crâne (comme repère tu peux considérer que la jonction oreille / visage se situe grosso modo à la moitié de la tête sur la vue de profil). Tu as tendance à placer le cou trop en avant aussi, à trop le centrer sous la tête alors qu'il est plus en arrière. Car la colonne vertébrale rejoint le crâne vers l'arrière du crâne au niveau des oreilles et la colonne vertébrale se situe à l'arrière du cou. Je t'ai fait un petit schéma pour ça ^^
Du coup de 3/4 tu as les mêmes soucis : il manque un peu de crâne et le cou est trop en avant, mais sinon c'est très bien :)
It works very, very well, I really like the lady's profile. Be careful with her 3/4 view, you have lowered the entire face.
And the man is missing a bit of skull (imagine that in profile, the junction of the ear/jaw is roughly at half/a good third of the face). This gives you an idea of the volume of the skull that we should see at the back of the head ^^ And the same for the man, you have moved the neck too far forward in profile. It's the spine that joins the neck and the head, and it is located at the back of the neck and ends about at the level of the ears at the back of the head. So the neck is more towards the back (you are more accurate for the girl, even though it's still a bit too forward I find).
In any case, well done, you have grasped the logic :D
Hello Sego o/
Ca marche très très bien, j'aime beaucoup le profil de la demoiselle. Attention sur son 3/4 tu as baissé tout le visage.
Et il manque un peu de crâne pour l'homme (dis-toi que de profil, la jonction oreille / mâchoire se situe grosso modo à la moitié / un bon tiers du visage). Ca te donne une idée du volume de crâne qu'on doit voir à l'arrière de la tête ^^ Et pareil pour l'homme toujours, tu as un peu trop avancé le cou de profil. C'est la colonne vertébrale qui joint le cou et la tête et elle se situe à l'arrière du cou et se termine à peu près au niveau des oreilles à l'arrière de la tête. Donc le cou est + en arrière, (tu es + juste pour la fille, même si c'est encore un poil trop en avant je trouve).
Interactions
Nombre de sujet(s) : 1
Nombre de réponse(s) : 12
03/01/2021
Want to learn drawing?
See our coursesInteractions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
10/01/2021
Not bad on the profile, it lacks a bit of the skull at the back of the head. You can roughly consider that the attachment between the ear and the face is "approximately" at the center of the head in profile. This gives you an idea of the size of the skull that is missing ^^ It's approximate, generally it's a bit less, but it's a good reference to have something more coherent.
Be careful not to make the man's face too slender in profile and not to push his jaw too far forward, you are more accurate on the jaws of the girl and the child ^^
For the 3/4 view, it's not bad either, I'm just going to send you a correction to review the face line which is not quite right ^^ Actually, you place the reliefs incorrectly, so I made a small diagram to show you.
Ho pas mal sur le profil, ça manque un peu de crâne à l'arrière de la tête. Tu peux considérer grosso modo que l'accroche entre l'oreille et le visage est "à peu près" au centre de la tête sur le profil. Ça te donne une idée de la taille du crâne qui manque ^^ C'est à la louche, en général c'est un peu moins, mais c'est un bon repère pour avoir quelque chose de plus cohérent.
Attention à ne pas trop affiner le visage de l'homme de profil aussi et ne pas mettre trop sa mâchoire en avant, tu es plus juste sur les mâchoires de la fille et de l'enfant ^^
Pour le 3/4 c'est pas mal aussi, je vais juste te joindre une correction pour revoir la ligne du visage qui n'est pas tout à fait juste ^^ En fait tu places mal les reliefs, du coup je t'ai fait un petit schéma pour te montrer.
Interactions
Nombre de sujet(s) : 1
Nombre de réponse(s) : 12
04/01/2021
Thank you in advance for the correction.
Merci d'avance pour la correction.
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 62
06/01/2021
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
10/01/2021
Yes that seems quite fair :D
It just lacks a bit of skull on the profile ^^ Be careful also not to widen the face too much in profile ^^
Oui ça me semble assez juste :D
Il manque juste un peu de crâne sur le profil ^^ Attention aussi à ne pas trop élargir le visage de profil ^^
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 1
12/01/2021
Try our courses for free
See our coursesInteractions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
23/01/2021
I can't see any images attached to your message, can you resend them to me please? ^^
Je ne vois pas d'images jointe à ton image, peux-tu me les renvoyer s'il te plait ? ^^
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 9
25/01/2021
Here are my first sketches
I admit they scare me a bit except maybe the child
Having a bit of trouble with the jaw in 3/4 view compared to the front view
Thanks for your feedback
Voilà mes premiers croquis
J avoue qu ils me font un peu peur sauf peut être l enfant
Un peu de mal à faire la mâchoire de 3/4 par rapport à la vue de face
Merci pour vos retours
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
07/02/2021
Sorry for the delay, I thought I had forgotten someone ^^
You're doing pretty well honestly, you just have two issues that consistently arise:
1. From the front, don't hesitate to tilt the edges of the face (don't do straight vertical lines) so that it widens a bit towards the skull :)
2. From a 3/4 view, you systematically offset the shape of the face contour, so I've attached a sketch for you to better understand which indentation and which bulge corresponds to what.
It lacks a bit of skull from the 3/4 view too, but we will come back to that a bit later :)
Otherwise it's very good :D
Navré pour le délai, il me semblait bien avoir oublié quelqu'un ^^
Tu t'en sors pas mal honnêtement, tu as juste deux problèmes qui se retrouvent systématiquement :
1. De face, n'hésite pas à incliner les bords du visage (ne pas faire des traits bien verticaux) pour que ça s'élargisse un peu vers le crâne :)
2. De 3/4, tu décales systématiquement la forme du contour du visage, du coup je t'ai joint un croquis pour que tu situes mieux quel creux et quelle bosse correspond à quoi
Ça manque un peu de crâne aussi de 3/4, mais on reviendra dessus un peu plus tard :)
Autrement c'est très bien :D
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 10
09/02/2021
Would it be possible to get your opinion and the elements to work on regarding the drawing of my first manga character?
Thank you in advance for your response =)
Y aurait t il moyen d'avoir votre avis ainsi que les éléments à travailler concernant le dessin de mon premier personnage manga ?
Merci d'avance de votre réponse =)
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
15/02/2021
Of course, you just need to post your drawing here :)
Bien sûr, il te suffit de poster ton dessin ici :)
Want to learn drawing?
See our coursesInteractions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 5
24/02/2021
Thank you in advance👍👍
Merci d'avance👍👍
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
28/02/2021
Not bad! The front-facing face is almost impeccable, I find the ears a bit small, but you will adjust that as you learn the other elements of the face, since everything is more or less proportional ^^
It's also missing some skull, and here I've attached a correction.
For the 3/4 view, it's pretty good too, it's just lacking a bit of forehead and skull there as well. Also be careful with the chin which is a bit too far back :)
C'est pas mal ! Le visage de face est quasi impeccable, je trouve les oreilles un peu petites, mais ça, tu l'ajusteras en apprenant les autres éléments du visages, vu que tout est plus ou moins proportionnel ^^
Il manque de crâne aussi, et là je t'ai joint une correction.
Pour le 3/4 on est pas mal aussi, il manque un peu de front et de crâne là aussi. Attention aussi au menton qui est un peu trop loin en arrière :)
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 1
01/03/2021
Interactions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
08/03/2021
Your front-facing portraits are quite good, but your profile ones need a bit more work.
You are missing quite a bit of the skull (as a guide, you can consider that the junction of the ear/face is roughly at the halfway point of the head in profile view). You also tend to place the neck too far forward, too centered under the head whereas it should be more towards the back, because the spine joins the skull towards the back of the head near the ears, and the spine is at the back of the neck. I made a little diagram for you ^^
So from the 3/4 angle you have the same issues: a bit of the skull is missing and the neck is too forward, but otherwise, it's very good :)
C'est pas mal, tes visages de face marchent bien, ça pêche un peu plus de profil par contre.
Il te manque pas mal de crâne (comme repère tu peux considérer que la jonction oreille / visage se situe grosso modo à la moitié de la tête sur la vue de profil). Tu as tendance à placer le cou trop en avant aussi, à trop le centrer sous la tête alors qu'il est plus en arrière. Car la colonne vertébrale rejoint le crâne vers l'arrière du crâne au niveau des oreilles et la colonne vertébrale se situe à l'arrière du cou. Je t'ai fait un petit schéma pour ça ^^
Du coup de 3/4 tu as les mêmes soucis : il manque un peu de crâne et le cou est trop en avant, mais sinon c'est très bien :)
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 11
16/03/2021
Try our courses for free
See our coursesInteractions
Nombre de sujet(s) : 3
Nombre de réponse(s) : 2508
20/03/2021
It works very, very well, I really like the lady's profile. Be careful with her 3/4 view, you have lowered the entire face.
And the man is missing a bit of skull (imagine that in profile, the junction of the ear/jaw is roughly at half/a good third of the face). This gives you an idea of the volume of the skull that we should see at the back of the head ^^ And the same for the man, you have moved the neck too far forward in profile. It's the spine that joins the neck and the head, and it is located at the back of the neck and ends about at the level of the ears at the back of the head. So the neck is more towards the back (you are more accurate for the girl, even though it's still a bit too forward I find).
In any case, well done, you have grasped the logic :D
Ca marche très très bien, j'aime beaucoup le profil de la demoiselle. Attention sur son 3/4 tu as baissé tout le visage.
Et il manque un peu de crâne pour l'homme (dis-toi que de profil, la jonction oreille / mâchoire se situe grosso modo à la moitié / un bon tiers du visage). Ca te donne une idée du volume de crâne qu'on doit voir à l'arrière de la tête ^^ Et pareil pour l'homme toujours, tu as un peu trop avancé le cou de profil. C'est la colonne vertébrale qui joint le cou et la tête et elle se situe à l'arrière du cou et se termine à peu près au niveau des oreilles à l'arrière de la tête. Donc le cou est + en arrière, (tu es + juste pour la fille, même si c'est encore un poil trop en avant je trouve).
En tout cas bravo, tu as bien saisi la logique :D
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 11
16/03/2021
La réponse au commentaire n’est pas encore autorisée.